Ink absorber is full or waste pad inside the printer is almost full.

Message on the Monitor screen or printer LCD: Ink absorber full. Ink absorber is full or Error Code 5B00, 5B01Ĭondition: The ink absorber is supposed to be full. Internal temperature error or Error Code 5400Ĭondition: The internal temperature is not normal.

Foreign material or paper debris around the purge drive system unit Ĭondition: An error occurred in the ASF cam sensor.

Purge cam sensor error or Error Code 5C00Ĭondition: An error occurred in the purge unit. Foreign material or paper debris in the LF drive.Smearing or scratches on the LF / EJ slit film.If other solution fail, replace one off the followingĬondition: An error occurred in the LF encoder signal.Foreign material or paper debris that obstructs the carriage movement.Smearing or scratches on the carriage slit film.Pressing the Resume/Cancel button will exit theġ4 times Non-supported ink cartridge installed Replace the non-supported ink cartridge with theġ6 times Used ink cartridge installed, or no ink Pressing the Resume/Cancel button will exit the error, and enable printing.Ĭondition: An error occurred in the carriage encoder signal. Or, confirm that the supported ink cartridges areħ times Ink cartridge not installed Install the ink cartridge(s), and close the access cover.Ĩ times Waste ink absorber full or platen waste ink absorber full warning (approx. (the ink cartridge EEPROM data is abnormal).

Operator Call Error (Alarm LED Blinking in Orange)Ģ times No paper Set paper, and press the Resume/Cancel button to feed the paper.ģ times Paper jam Remove the jammed paper, and press the Resume/Cancel button.Ĥ times No ink Replace the ink cartridge(s), or press the Resume/Cancel button to continue printingĥ times The ink cartridges are not properly installed, or a non-supported ink cartridge is installed Errors are displayed by the LEDs, and ink low warnings are displayed by the Status Monitor.ģ-1.

Download canon mg3670 resetter tool